Franklin

a| 99055018

a| 044410030X q| alkaline paper

a| UKM b| bA017085

a| (OCoLC)ocm42889689

a| (OCoLC)42889689

a| 2745582

a| (PU)2745582-penndb-Voyager

a| DLC b| eng c| DLC d| OHX d| C#P d| UKM

a| PAUU

a| TA455.C43 b| C468 1999

a| 620.1/4 2| 21

a| Ceramics and ceramic composites : b| materialographic preparation / c| Gerhard Elssner ... [and others] ; translated by Randall Wert.

a| Amsterdam ; a| New York : b| Elsevier Science B.V., c| 1999.

a| viii, 175 pages : b| illustrations ; c| 25 cm

a| text b| txt 2| rdacontent

a| unmediated b| n 2| rdamedia

a| volume b| nc 2| rdacarrier

a| Includes bibliographical references.

g| 2 t| Fundamentals of preparing polished sections g| 2 -- g| 2.1 t| Selection and sampling g| 2 -- g| 2.2 t| Sectioning g| 2 -- g| 2.3 t| Mounting and impregnation g| 8 -- g| 2.3.1 t| Hot (compression) mounting g| 9 -- g| 2.3.2 t| Cold mounting g| 9 -- g| 2.3.3 t| Recovery of embedded samples g| 12 -- g| 2.3.4 t| Impregnation g| 12 -- g| 2.4 t| Grinding, lapping, and polishing g| 17 -- g| 2.4.1 t| Preparation equipment g| 23 -- g| 2.4.2 t| Grinding g| 25 -- g| 2.4.3 t| Materialographic lapping g| 27 -- g| 2.4.4 t| Polishing g| 28 -- g| 3 t| Revealing the microstructure g| 33 -- g| 3.1 t| Microstructural imaging in the optical microscope (OM) g| 33 -- g| 3.1.1 t| Imaging methods of optical microscopy g| 33 -- g| 3.1.2 t| Electronic image processing and contrast enhancement g| 34 -- g| 3.2 t| Tips on contrast enhancement and etching g| 39 -- g| 3.2.1 t| Relief polishing g| 39 -- g| 3.2.2 t| Contrast enhancement with interference layers g| 39 -- g| 3.2.3 t| Chemical dip etching g| 40 -- g| 3.2.4 t| Thermal etching g| 43 -- g| 3.2.5 t| Plasma etching g| 43 -- g| 3.2.6 t| Ion etching g| 45 -- g| 3.2.7 t| Electrolytic etching g| 46 -- g| 3.3 t| Microstructural imaging in the scanning electron microscope g| 48 -- g| 3.4 t| Ultrasonic scanning microscopy g| 54 -- g| 4 t| Material-specific preparation of polished sections g| 59 -- g| 4.1 t| Properties of ceramic materials g| 61 -- g| 4.2 t| Pores in ceramic materials g| 67 -- g| 4.3 t| Examples of preparing ceramic materials g| 74 -- t| [alpha]-Al[subscript 2]O[subscript 3] (corundum) in single-crystal form g| 74 -- t| Aluminum oxide ceramic: 99.5% [alpha]-Al[subscript 2]O[subscript 3] g| 74 -- t| Aluminum oxide ceramic: 99.7% [alpha]-Al[subscript 2]O[subscript 3] g| 76 -- t| Aluminum oxide ceramic: [alpha]-Al[subscript 2]O[subscript 3] with SiO[subscript 2] and MgO additives g| 78 -- t| Aluminum oxide ceramic: [alpha]-Al[subscript 2]O[subscript 3] with glass phase g| 79 -- t| Aluminum nitride A1N, sintered g| 80 -- t| Boron carbide B[subscript 4]C, high density g| 81 -- t| Boron nitride BN, sintered g| 83 -- t| Calcium carbonate CaCO[subscript 3], white marble g| 84 -- t| Cerium oxide CeO[subscript 2] g| 85 -- t| Chromite g| 86 -- t| Refractory ceramics g| 87 -- t| Glass g| 88 -- t| Graphite g| 89 -- t| Coal g| 90 -- t| Lanthanum strontium manganese oxide g| 91 -- t| Silicon carbide SiC, pressureless-sintered g| 92 -- t| Silicon carbide varistor ceramic g| 95 -- t| Silicon nitride Si[subscript 3]N[subscript 4], hot-pressed g| 96 -- t| Si-SiC-C ceramic g| 97 -- t| Zinc oxide ZnO g| 97 -- t| Zirconium oxide ZrO[subscript 2] g| 100 -- t| Zirconium oxide with aluminum oxide inclusions g| 103 -- t| Zirconium oxide, partially stabilized with MgO and SiO[subscript 2] g| 105 -- g| 4.4 t| Preparation of ceramic composites g| 105 -- g| 4.5 t| Examples of preparing ceramic composites g| 107 -- t| Active-brazed joint between graphite and a TZM molybdenum alloy g| 107 -- t| Aluminum alloy reinforced with boron fibers g| 110 -- t| Flame-sprayed aluminum oxide coating on steel g| 111 -- t| Glass fiber reinforced plastic g| 113 -- t| Solder glass/stainless steel joint g| 114 -- t| Ceramic/cermet composite g| 115 -- t| Carbon fiber reinforced carbons g| 116 -- t| Carbon fiber reinforced plastic g| 117 -- t| Spherical nuclear fuel g| 120 -- t| Copper coating on an aluminum nitride ceramic g| 122 -- t| Plasma-sprayed aluminum oxide coating on steel g| 124 -- t| Plasma-sprayed chromium oxide coating with Ni-20%Cr interlayer on steel g| 125 -- t| Plasma-sprayed zirconium oxide coating on a nickel super alloy g| 126 -- t| SiC/C fibers in an aluminum alloy g| 127 -- t| Titanium carbide coating on graphite g| 129 -- t| Titanium nitride coating on an inconel alloy g| 130 -- t| WC-Co carbide metal g| 131 -- g| 5 t| Preparing polished sections for examination g| 134 -- g| 5.1 t| Polished sections g| 135 -- g| 5.1.1 t| Oblique sections g| 135 -- g| 5.1.2 t| Controlled removal g| 136 -- g| 5.2 t| Thin sections g| 140 -- g| 5.2.1 t| Preparation of thin sections g| 140 -- g| 5.2.2 t| Microscopic examination of thin sections g| 143 -- g| 6 t| Analysis of hardness testing indentations g| 144 -- g| 6.1 t| Hardness testing of ceramic materials g| 144 -- g| 6.2 t| Determining fracture toughness by indentation hardness testing g| 151 -- g| 6.3 t| Application of hardness testing to composite layers and surface layers g| 154 -- g| 6.3.1 t| Indentations in the layer surface g| 156 -- g| 6.3.2 t| Measuring the layer hardness in the section g| 157.

a| Ceramic materials. 0| http://id.loc.gov/authorities/subjects/sh85022004

a| Ceramic materials. 2| fast 0| http://id.worldcat.org/fast/850974

a| Composite materials. 0| http://id.loc.gov/authorities/subjects/sh85029397

a| Composite materials. 2| fast 0| http://id.worldcat.org/fast/871682

a| Elssner, Gerhard. 0| http://id.loc.gov/authorities/names/n89667002

a| MARCIVE 2022

a| 366764 b| 2000-06-21 c| 96.5 c| 79.13 g| 1 i| PromptCat

a| 92 b| PAU

a| f b| 2000/07/03