Advances in Rolling Equipment and Technologies II.

Jiang, Zheng Yi.
Zurich : Trans Tech Publications, Limited, 2012.
1 online resource (431 pages)
1st ed.
Advanced Materials Research Ser.
Advanced Materials Research Ser. ; v.Volume 572

Location Notes Your Loan Policy


Rolling (Metal-work) -- Congresses.
Metal-work -- Congresses.
Electronic books.
ISARET2012 Selected, peer reviewed papers from the International Symposium on Advanced Rolling Equipment Technologies (ISARET 2012), April 7-9, 2012, Beijing, China.
Advances in Rolling Equipment and Technologies II
Preface, Committee and Sponsors
Table of Contents
I. Applied Fundamental
New Six-High Mills in Cold Tandem Rolling - Control Strategies and Performance Characteristics
Hot Rolling State Analysis Based on Kernel Principal Component Analysis and Information Entropy
Rolling Theory Analysis and Forces Calculation of Heavy Cylinder Rolling Mill with Two Drive Rolls
Calculation of Rolling Force of 3700mm Cylindrical Shell Rolling Mill
Hot Strip Tail Flick Recognition Based on Morphological Pattern Spectrum
II. Rolling Technologies
Research on High Pressure Abrasive Water Jet for Cold Rolling Descaling
New Methods of Quality Control Systems on Strip Rolling Mills
Technology Innovation of Short Stress Path Mill and Flying Shear
Research of Smith Monitor AGC Based on Active Disturbance Rejection Control
Technical Characteristics and Application for a New Type of 8-Roll Cold Rolling Mill
Research and Application on Spring Model of Hot Strip Mill
Application of Probabilistic Neural Network in the Rolling Rhythm Evaluation of Hot Strip Mill
Research in Hot-Rolling Downcoiler Dynamic Torque Control
BAOSTEEL Edge Drop Control System Used on 1420mm Cold Tandem Mill
Study on the Relationship between Chatter Mark Vibration and Rolling Skid for a Twenty-High Roll Mill Based on the Measured Torsional Strain of the Main Drive Shaft
Situations and Prospects of the Study on Steel Warm Rolling Technology
Equation of Shape Control and Edge Drop on UCMW Tandem Cold Mill
Research of the Strategy on the Flatness and Gauge Control Based on Coiling Variable Tension Control Process
The Research on the Coupling Relation between Flatness and Edge Drop for Tandem Cold Rolling Mill
Research on the Edge Drop Control Strategy in Cold Tandem Rolling Mill.
Active Disturbance Rejection Control for Hydraulic Position Control System of High-Quality Cold Rolling Mill
Flatness On-Line Preset Technology for Cold Rolling Mill
Research of the Roll Systems Flexural Coupling-Dynamic Modeling
Study and Application of SSC Model on Hot Rolling Wide Strip Mill
Study on Predictive Model of Plate Camber
Design and Applications on Automatic Gauge Control and Automatic Tension Control for Continuous Tandem Cold Mill
Effect of Process Parameters on the Temperature of 4Cr9Si2 Martensite Refractory Steel during CWR
Simulation and Analysis on Dynamic Response Characteristics of Six-High Rolling Mill Based on FEM
Information Management Practice of Cold Rolling Progress Based on "High-Speed Management
Research on Flatness Feed-Forward Control for Cold Rolled Strip
Edge Shape Control Technology Research of Very Thin Specifications DI Tinplate in Baosteel Cold Rolling
Effect of Three Types of Driving Modes of Rolling Mill with Six Rolls on the Friction Force between Rolls
Study on the Buckling Deformation of Orthotropic Strip
Key Technologies and Application of Automatic Control System for Wide Stainless Steel Hot Strip Rolling Line
Design of a New Type Casting Rolling Mill Screw down System
Seamless Tube in Stretch Reducing 3-D Thermal-Mechanical Coupling Analysis
Research on Harmonic Response of Hydraulic Screwdown System on Modern Hot Rolling Mill
Study on Diagnostic Strategy for Plate Camber
III. Materials Science and Processing
Deformation Resistance of Alloy 2.25Cr1Mo0.25V of Heavy Cylinder for Hydrogenation Reactor
Key Technology to Reduce Residual Stress Level of High Strength Steel
Cooling Process of Die Steel during On-Line Pre-Hardening
Simulation and Application of Molecular Dynamics in Materials Science.
Numerical Simulation and Experiment on Quenching Process of 718 Mould Steel with New Online Hardening Equipment
Smelting Period Shortening Practices in Process of Electric Arc Furnace Steelmaking
Precipitation Behavior of Magnetite in Oxide Scale during Cooling of Microalloyed Low Carbon Steel
The Influence of Process Parameters during Hot Stamping of AA6111 Aluminum Alloy Sheet
Constitutive Relationship of TRIP780 Steel in Quenching Process
Study on Superalloy Tube Extrusion Process Using Finite Volume Method
Experimental Research on Heating Performance of Monel K-500 Alloy
IV. Leveling and Shearing Technologies
Study on Tilt Model and Finite-Element Simulations on Roller Leveler
The Modification of Leveling Model for Roller Leveler Based on Ansys/LS-DYNA
3D Cantilever Model Research on Roller Leveling Process of Plate with Lateral Buckling Defects
Controlling Research of the Pre-Bending Deformation before Straightening and Residual Stresses after Straightening for 100-Meter
The Influence of Process Scheme on the Straightening Effect of Section Steel
Analysis of the Strip Curvature in Tension Levelling with FEM
The Design and Implementation of Intelligent Distributed Computer Monitor-Control System for Full Hydraulic Plate Leveler
The Influence and Simulation of Crank Shaft Length over Upper Knife Holder Trace of Rolling-Cut Bilateral Shear
V. Testing Technologies
On-Line Determination of Texture in Deep Drawing Steel Sheet by Two-Dimensional X-Ray Diffraction
Study on Design Parameters of Whole-Roll Shape Detecting Roll
The Ultrasonic Detection of Macro-Inclusions in Steel
The Study on High Precision 3D Detection Method of Steel Plate Surface Based on Structured Light
Source Location of Cracks in a Working Roll of the Temper Mill with Acoustic Emission Technology.
Discussion of Monitor and Control Strategies to Enhance Butt Joint Quality for Endless Bar Rolling System
Cold Rolling Backup Roller Bearing Temperature Remote Monitoring Method Based on Wireless Sensor Network
Research on the Entire Roll Type Shape Meter of Cold Rolling Strip and its Industrial Application
VI. Related Research and Development
The Study of IOT Architecture for Steel Strip Production Process
Sensorless Vector Control of Induction Motor Based on Machine Model
Research of the Strategy in the Furnace Temperature Control System of Compact Strip Production
Hydrostatic Horizontal Cell
Analysis of Processing Equipment for Near-Net Shape Manufacturing Technology of Materials
Study on the Side Blowing Parameters of High-Density Pipe Cooling Equipment
Research and Application of Dynamic Secondary Cooling Control System for a Continuous Steel Billet Caster
Multi-Level Materials Service Safety Assessment System
Keywords Index
Authors Index.
Description based on publisher supplied metadata and other sources.
Local notes:
Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2021. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.
Lin, Jian Guo.
Wang, Li.
Yang, Quan.
Zang, Yong.
Zhang, Qing Dong.
Zhou, Cun Long.
Zhou, Cun Long.
Other format:
Print version: Jiang, Zheng Yi Advances in Rolling Equipment and Technologies II